Electrical Systems - Indicator Lights

5MM Xtreme LED Panel Lights

Your Price:
$6.99

5MM Xtreme LED Flush Lights

735-61 + Option(s)

The Xtreme Flush Mount LED’s, 5mm (9/32”) Diameter Lens. They are made of Electro-polished Stainless Steel for maximum corrosion resistance and easily mount in the dash panel through a 13/32” diameter hole and will conveniently wire up to your switch to indicate when the switch is on. They are available in Red and Blue and are wired for a 12V. system. The clean, Flush Mount LED’s mount in a Counter Sunk Hole and lay flush with the top of the Dash Panel.

These LED's are for 12 Volt systems ONLY.

5mm Flush Mount LED's Mounting & Wiring instructions:

Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Use a 90 degree counter sink to (3/8" Dia.) Insert the LED thru the drilled hole and push the O-Ring onto the LED body. Then push the retaining ring onto the LED forcing it to compress the O-Ring.

Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.

5MM Xtreme LED Panel Lights

Your Price:
$6.99

5MM Xtreme LED Panel Lights

735-60 + Option(s)

The Xtreme Flush Mount LED’s, 5mm (9/32”) Diameter Lens. They are made of Electro-polished Stainless Steel for maximum corrosion resistance and easily mount in the dash panel through a 13/32” diameter hole and will conveniently wire up to your switch to indicate when the switch is on. They are available in Red and Blue and are wired for a 12V. system. The clean, Flush Mount LED’s mount in a Counter Sunk Hole and lay flush with the top of the Dash Panel.

These LED's are for 12 Volt systems ONLY.

5mm Flush Mount LED's Mounting & Wiring instructions:

Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Use a 90 degree counter sink to (3/8" Dia.) Insert the LED thru the drilled hole and push the O-Ring onto the LED body. Then push the retaining ring onto the LED forcing it to compress the O-Ring.

Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.

Green LED Indicator Light, 5/16 mounting hole, 12 Volt
Your Price:
$16.95

Blue LED Indicator Light, 5/16 mounting hole, 12 Volt

620-8955

Blue LED Indicator Light, 5/16 mounting hole, 12 Volt

A polished metal housing gives these lights an attractive look and durability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18 gauge wire leads. Provides a high intensity brightness and is water tight. Available in Red, Amber, Blue and Green.


Colored Gauge Bulb Covers
Starting From:
$7.99
This Part has options, please click the button below to order.

Colored Gauge Bulb Covers

865-32 + Option(s)

Colored Gauge Bulb Covers, available in Red, Blue, Green, and Yellow. Goes over Standard gauge bulb used in Autometer, Hardin, etc... gauges. Note Livorsi gauges use LED lights and these will not work with them or any other gauge that uses LED's. Comes in packs of 3.

Dash Cover – White
Your Price:
$39.99

Dash Cover – White

615-4012

Dash Cover – White

Pre-Labeled: (from left to right) Int. Lights, CRT Lights, Blower, Pump, Nav. Lights, Acc., Hatch, Horn


Red LED Indicator Light, 5/16 mounting hole, 12 Volt
Your Price:
$16.95

Red LED Indicator Light, 5/16 mounting hole, 12 Volt

620-8970

Red LED Indicator Light, 5/16 Mounting Hole, 12 Volt

A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.


Green LED Indicator Light, 5/16 mounting hole, 12 Volt
Your Price:
$16.95

Green LED Indicator Light, 5/16 mounting hole, 12 Volt

620-8960

Green LED Indicator Light, 5/16 mounting hole, 12 Volt

A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.


Amber LED Indicator Light, 5/16 mounting hole, 12 Volt
Your Price:
$16.95

Amber LED Indicator Light, 5/16 mounting hole, 12 Volt

620-8965

Amber LED Indicator Light, 5/16 Mounting Hole, 12 Volt

A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.


Flush Mount Indicator Lights - Red
Your Price:
$8.99

Flush Mount Indicator Lights - Red

620-08973

Flush Mount Indicator Lights - Red Indicator Light

Way to let you know an accessory is on or to warn of a potential problem.These lights are designed to mount flush to your dash and they use an attractive chrome bezel.

The hole diameter for this light is 1/2" or .500


Flush Mount Indicator Lights - Green
Your Price:
$8.99

Flush Mount Indicator Lights - Green

620-08974

Flush Mount Indicator Lights - Green Indicator Light

Way to let you know an accessory is on or to warn of a potential problem.  These lights are designed to mount flush to your dash and they use an attractive chrome bezel.