Switches, Knobs & Bezels - Kill Switches

Mercury Racing Style Ignition Kill Switch For Magneto Ignitions

These switches are the ultimate in safety design.  The snap off cap willrelease in a full 360-degree circle.  This switch is recognized by allmajor boat racing associations.  The switch utilizes a spring-loaded safetybutton that will immediately close the circuit when the cap comes off. This is a normally closed switch which will apply ground to kill a magneto when the cap is pulled.

Outer diameter of 1.875" at the base.

Mercury Racing Style Ignition Kill Switch For Points Or Electronic Ignitions

These switches are the ultimate in safety design. The snap off cap will release in a full 360-degree circle. This switch is recognized by all major boat racing associations. The switch utilizes a spring-loaded safety button that will immediately close the circuit when the cap comes off. This is a normally open switch and will cut the power when the cap is pulled to a standard ignition.

Single I/O With Coiled Lanyard

For a single inboard engine, does not work with outboards. Meets requirements of existing laws covering mandatory use ofemergency stop switches. Plastic self-retracting lanyard. Black matte finish for attractive appearance. Mounts in a 1-1/2" diameter hole.Overall dimensions of switch housing are 2-3/4" x 2" and requires 1-1/2" behindpanel. Dual engine switches provide two completely isolated circuits to prevent feedback from one engine to the other.

Dual I/O With Coiled Lanyard

For dual inboard engines, does not work with outboards. Meets requirements of existing laws covering mandatory use of emergency stop switches. Plastic self-retracting lanyard. Black matte finish for attractive appearance. Mounts in a 1-1/2" diameter hole.Overall dimensions of switch housing are 2-3/4" x 2" and requires 1-1/2" behind panel. Dual engine switches provide two completely isolated circuits to prevent feedback from one engine to the other.

Replacement Cap (Always Carry A Spare)

Replacement cap for racing style ignition kill switches 525-368100 & 525-368101.

Stop switch lanyard 8M0164891, (supercedes 8M0092850) is for use with all Mercury and Quicksilver stop switches located at the helm. The lanyard is bright red/orange, coiled, woven nylon coated lanyard with the large plastic clip at operator end and loop style clip at engine end. Don''t operate your boat without the stop switch lanyard attached to the boat driver/operator. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• For helm located stop switch.
• Bright red/orange, coiled, woven nylon coated lanyard with large plastic clip at operator end and loop style clip at engine end.
• Don''t operate your boat without the stop switch lanyard attached to the boat driver/operator.
• Engine will not run without the lanyard attached to the stop switch.
• Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive

Kill Switch for General Use or Replacement on Stiletto Control

Kill Switch for general use or for replacement on (620-6035) Hardin Marine Billet Stiletto Control

• Kit includes switch, 50-inch coiled lanyard and disconnect clip
• Universal fit Black nylon casing
• Rating: 5A at 12V
• Protective clear package for easy visibility and application

Replacement Kill Switch Lanyard

Replacement ignition kill switch lanyard fits 525-368100, 525-368101 and 525-301104. Also Replaces Mercury #8M0092847

7 Key Universal Lanyard

The Seadog Universal 7 Key Lanyard features 7 kill switch keys that will fit Johnson, Evinrude, Mercury, yamaha, Honda, Tohatsu, Suzuki and Nissan. When extended, the lanyard measures 50".