Bilge Hardware - Bilge Blowers

Bilge Blower - 3" Inlet/Outlet
Your Price:
$41.99

Bilge Blower - 3" Inlet/Outlet

620-70303

3" Inlet/Outlet - 8" Long X 3-1/4" Wide X 4-1/2" High 130 CFM

Easy install bilge blower, is long-lasting and efficient at exhausting fumes from an engine compartment. This bilge blower is water and corrosion resistant. It has been sealed and the connection shave been shrink wrapped. The bilge blower's blade has been design to be extremely quiet. This bilge blower meets and/or exceeds the safety standard of ABYC, CE, NMMA, and USCG. Suggested use with an 8 amp fuse.<


Bilge Blower - 4" Inlet/Outlet
Your Price:
$32.99

Bilge Blower - 4" Inlet/Outlet

620-70304

4" Turbo In-Line Blower

  • Nickel Plated Motor Can for Greater Corrosion Resistance
  • Stiffening Ribs to Reduce Housing Distortion
  • Motor Cap Seals Wires and Motor for Better Water Resistance
  • Low Amp Draw Motor, for Longer Blower and Battery Life
  • Tabs on Intake and Exhaust Hold Ventilation Hose/Clamp Firmly in Place
  • Five-Blade for Maximizes Airflow and Efficiency
  • Caulked, Tinned Wires for Improved Corrosion Resistance
  • Built-In Mounting Feet Allow Easy Vertical or Horizontal Install
  • Hose Connection: 4” OD

In-Line Blower 3" 13.6v 2.9a
Your Price:
$49.99

In-Line Blower 3" 13.6v 2.9a

464-140

In-Line Blower 3" 13.6v 2.9a 

Rule In-Line Blowers are ideal for bilges, engine compartments, galleys and heads. They work efficiently to provide ventilation in a high-output fashion with greater air flow and lower amp draw.

  • Ducting: 3"
  • CFM: 135
  • Corrosion resistant nickel plated motor housing
  • Quiet operation
  • Slip on inlet and outlet ducting connections
  • Sealed motor and shaft for moisture protection
  • ABYC - H2; ISO 9097 compliant
  • N.M.M.A. type accepted
  • USCG 183.410 compliant

In-Line Blower 4" 13.6v 2.4a
Your Price:
$62.99

In-Line Blower 4" 13.6v 2.4a

464-240

In-Line Blower 4" 13.6v 2.4a 

  • Ducting: 4"
  • CFM: 235
  • Corrosion resistant nickel plated motor housing
  • Quiet operation
  • Slip on inlet and outlet ducting connections
  • Sealed motor and shaft for moisture protection
  • ABYC - H2; ISO 9097 compliant
  • N.M.M.A. type accepted
  • USCG 183.410 compliant

Rule In-Line Blowers are ideal for bilges, engine compartments, galleys and heads. They work efficiently to provide ventilation in a high-output fashion with greater air flow and lower amp draw.