Fuel Systems - Throttle Brackets

Square Bore Carburetor Throttle Bracket

This chrome plated spread bore style throttle bracket is designed to be sandwiched between the carburetor and intake manifold while providing a secure mounting point.

Stainless Steel Throttle Cable Bracket For Edelbrock Carburetors

This beautifully polished stainless steel throttle bracket will allow mounting of all popular cable clamps. This bracket mounts above the carburetor flange to provide a solid mounting point for your cable without the flex associated with aluminum brackets.

Note: Cable clamps sold separately.

Stainless Steel Throttle Cable Bracket For Holley & Quick Fuel Carburetors

These brackets allow mounting of all popular cable clamps providing a solid cable clamp foundation. These brackets fasten to the top of the carburetor base plate while using existing hardware. All of these brackets are manufactured from stainless steel. The bracket will not fatigue and break like aluminum models. Each bracket is available polished or powder coated in a variety of popular colors. Note cable clamps sold separately. Fits 4150/4160 square bore bolt pattern 5.625" center to center

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Stainless Steel Throttle Cable Bracket For Holley Dominator & Barry Grant King Demon Carburetors

This beautifully brushed stainless steel throttle bracket will allow attachment of all popular cable clamps. This bracket mounts above the carburetor flange to provide a solid mounting point for your cable without the flex associated with aluminum brackets. 5.375" center to center bolt pattern.

Cable clamps sold separately. 

Stainless Steel Throttle Cable Bracket For Holley Sniper EFI Systems

This stainless steel throttle bracket will allow mounting of all popular cable clamps and accessories to a Holley Sniper EFI System. This bracket mounts above the carburetor flange to provide a solid mounting point for your cable without the flex associated with aluminum brackets. Raw Finish.

Note: Cable clamps sold separately. Sniper throttle arms may require an extension to match different throttle assembly throws because EFI  linkages are different from Carbs. We manufacture this bracket to aid in cable attachment only.

Ford 429/460 Throttle Bracket

Here's the original equipment style throttle bracket that has been used by boat manufacturers for years. These brackets are gold cadmium plated to resist corrosion. These brackets are designed for original equipment intake manifold. Some aftermarket intake manifolds might require slight modification.

Quadra-Jet and Spread Bore Throttle Bracket

This chrome plated spread bore style throttle bracket is designed to be sandwiched between the carburetor and intake manifold while providing a secure mounting point for all popular cable clamps.

Quick Release 33C Stainless Steel Cable Clamp Bracket

This is the most popular method of attaching a standard 33C throttle cable to a throttle bracket. This clamp features a quick release lever allowing you to detach the throttle assembly when performing tuning or maintenance. Replaces Dometic / SeaStar # 031419.

33C Throttle Cable Installation Kit

33C Cable Heim End - 10-32 Thread

These stainless heim ends are used in severe duty and racing applications.

This heim end is designed to be threaded on the end of a 33C cable and attach using a 10-32 bolt.

33C Cable Heim End - 10/32 x 1/4 Heim End for Jacuzzi

These stainless heim ends are used in severe duty and racing applications. This heim end is designed to be threaded on the end of a 33C cable and bolt to a Jacuzzi Jet using a 1/4 bolt.

33C Quick Release Ball Joint Assembly 10-32 Threads

This is a quick release style ball joint assembly This unit threads onto a 33C style cable while the threaded male stud is fastened to the carburetor by using a sure lock threaded sleeve for quick detachment.
1-1/16"Width x 1-1/16" Length 
1/2" Thread Length

Brass 33C Cable Attaching Pivot, 1/4" Shaft, 10-32 Thread

This brass pivot is designed to thread onto your 33C throttle cable and provides a secure attachment point to your carburetor. Uses a 3/32 cotter pin (Not Included see related parts) to hold in place.

MerCruiser Cable To Holley/Edelbrock/Quick fuel Carburetor Conversion Kit

This linkage adapter kit is used when converting from an original equipmentcarburetor. This kit provides the necessary components to allow you toattach factory style MerCruiser cables to any plate style mounting.

Carburetor Throttle Stud

Throttle Stud 7/32" diameter