V-Drive Components

Aluminum 1" Rudder Quadrant
Your Price:
$49.99

Aluminum 1" Rudder Quadrant

500-0036

Aluminum 1" Rudder Quadrant

  • Made from 6061-T6 aluminum.
  • Quadrant has a 5” radius
  • 1/4” keyway

This heavy duty quadrant has a clamp type boss for simple installation. The bolt locks the quad- rant to the shaft. Quadrant has a 5” radius and a 1/4” keyway for added safety.


Cavitation Plate Gauge
Your Price:
$266.50

Billet Aluminum Passenger Foot Pegs

495-227

Billet Aluminum Passenger Foot Pegs

Two beautifully machined 4" long foot pegs made from 6061-T6 aluminum. Mounts easily to your stinger with 2x 5/16" bolts. Included are 2x foot pegs, 2x mounting plates and 8x rubber o-rings. Ready to polish, anodized or powder coat to match your current rigging.


Bronze 1-1/8" Rudder Quadrant
Your Price:
$115.99

Bronze 1-1/8" Rudder Quadrant

500-0041

Bronze 1-1/8" Rudder Quadrant

  • Made from 6061-T6 aluminum.
  • Quadrant has a 5” radius
  • 1/4” keyway

This heavy duty quadrant has a clamp type boss for simple installation. The bolt locks the quadrant to the shaft. Quadrant has a 5” radius and a 1/4” keyway for added safety.


Cavitation Plate Gauge
Your Price:
$34.99

Cavitation Plate Gauge

495-210

Cavitation Plate Gauge

  • Made from 6061 Aluminum with a nice machined finish.
  • It is 6" long and 1/2" wide.
    • There are 12 steps in at 1/16" increments:
    • starting at 1/16" and ending at 3/4" tall
  • Engraved text on each step in fractional increments.

Use this Cavation Plate Gauge with your straight edge on the bottom of your boat to measure cavation plate set-up. Measure and document your set-up or change it to a know winning combination.


Aluminum 1" Rudder Quadrant
Your Price:
$399.99

D21 Enterprises Cavitation Plate Lockout

495-228

Cavitation Plate Lockout

Safe, low profile 5 position lockout assembly. Fits standard ½” diameter cavitation rods. Made from 6061-T6 aluminum that can be easily polished or anodized to match your existing hardware. Each tab incorporates a built-in Teflon washer to avoid any metal to metal contact and a smooth operation. Four bolt aluminum safety collar is included. Approximate size is 3” x 3” x 3 5/16”. Secures to stringer using 2x 5/16” tapped holes.


Cavitation Plate Gauge
Your Price:
$249.99

V-Drive 1" Rudder Quadrant

495-209

V-Drive 1" Rudder Quadrant

  • Made from 6061-T6 aluminum.
  • Standard 1" bore for 1" rudders
  • 1/4" keyway
  • 3/8" clamp hole for rudder

Direct replacement for your standard rudder quadrant. Top cable clamp features two milled in scallops to help "bite" into the standard 3/16" cable. Top clamp has a built in clearance when tightened onto steering cable it will be flush with the top surface. Supplied with 2x 1/4" corrosion resistance grade 8 bolts that screws into to 2 heli-coiled holes installed into the quadrant. Also supplied will be 2x 1/4"-20 lock nuts for safety.


V-Drive 1" Rudder Quadrant Smooth
Your Price:
$248.99

V-Drive 1" Rudder Quadrant Smooth

495-208

V-Drive 1" Rudder Quadrant Smooth

  • Direct replacement for your standard rudder quadrant.
  • 6061-T6 aluminum
  • Standard 1" bore for 1" rudders
  • 1/4" keyway
  • 3/8" clamp hole for rudder

Top cable clamp features two milled in scallops to help "bite" into the standard 3/16" cable. Top clamp has a built in clearance when tightened onto steering cable it will be flush with the top surface.
Supplied with 2x 1/4" corrosion resistance grade 8 bolts that screws into to 2 heli-coiled holes installed into the quadrant. Also supplied will be 2x 1/4"-20 lock nuts for safety.