Page:1 2 3 4 … 57  Move Next
“Hurricane Lite

"Hurricane Lite" HP525 / 600 / 700 Swept Header with CMI Flange

620-33550
Your Price:
$5,299.99

Quantity:  
MOST COMMONLY ASKED QUESTIONS
Question: Why were the OEM Mercury Racing headers from the factory prone to failure?
Answer: Many of the failures came from overheating of the header itself as the water jacket was insufficient and small so that in the event of a sea pump impeller failure and over heating, the header didn't carry enough water supply to cool the header itself causing premature failure. Another common problem was inconsistency in material qualities that lead to premature corrosion damage.
Solution: The Hurricane Lite Header is the only current generation header offering not only thicker 14 gauge material on both the inner and outer tubes (OEM and GenX are 14/16 gauge). The outer tubes of the hurricane lite are 2-1/2" as OEM and GenX headers are 2-3/8" The Hurricane Lite header features 40% larger water jackets.
 
Question: Why do the aftermarket replacement headers not match the design of my original headers?
Answer: Mercury Racing carries an exclusive agreement with the OEM manufacturer that the design was proprietary to them. So the GenX is designed to have a different appearance.
Solution: Due to the fact that Hardin is a Performance exhaust crafting house and we were not the OEM supplier we can use the same attractive OEM styling in the appearance of our headers
 
Question: Do the aftermarket headers have welded water inlet tubes like my OEM headers and do I need those?
Answer: Well, the Gen X replacement does not, due to their production agreement with Mercury Racing not to duplicate. Do you need them? NO. Do you want them? ABSOLUTELY. The last thing you want is a water pump impeller failure and the glowing red hot exhaust to melt or burn the rubber hose connections off. This is a common scene of engine fires when the exhaust hoses are melted and fall flaming onto your boats carpeted floor or exposed wood bottom.
Solution: Hardin recognizes the significance in safety the welded water inlet trees offer and it is a standard feature in the Hurricane Lite headers.
 
Question: Is there a cure for leaking or seeping tailpipe to header connections?
Answer: Yes, just as engine manufacturers around the world have moved to o-ring seals instead of gaskets, the header tailpipe system needs to as well.
Solution: The V-Tex High temperature space age tailpipe sealing O-Ring connection from Hardin Marine is the only header manufacturer to incorporate this technology to date. This sealing and reliability is 10X that of a gasket.
 
Question: Why does the aftermarket replacement header system look like the tailpipe hose connections are kinked or not straight?
Answer: Due to the factory that the aftermarket replacement header systems collector design. They do not allow for the OEM hose to connect correctly and to align it must be modified.
Solution: The Hardin Hurricane Lite header features its own molded hose connection to provide a perfect fit and finish.
 
Question: It doesn't seem like the replacement headers have the same shine as the headers I see on many boats?
Answer: You may be comparing to custom headers? As the OEM header and Replacement GenX header use a OEM production finish standard. It is not the same standard as a show or custom produced header.
Solution: All Hardin Marine headers are finished to a show quality polished finish.

Hardin Marine Hurricane Lite vs. CMI GEN X

   

Hardin
Marine

CMI

Thick 14 Gauge Inner and Outer Pipes (OEM/CMI are 14/16)   Yes No
OEM Style Fanned Tube   Yes No
40% Larger Water Cooling Jacket due to 2-1/2" Outer Tube   Yes No
Welded Stainless Steel Water Inlet Tubes (NOT RUBBER)   Yes No
High Temp O-Ring Sealed Tail pipe Connection (No gasket)   Yes No
OEM Style Molded Tailpipe Water Hose Connection   Yes No
Show Quality Polished Finish   Yes No


“Hurricane Lite

"Hurricane Lite" HP525 / 600 / 700 Swept Header with Hardin Marine Flange

620-33500
Your Price:
$5,299.99

Quantity:  
“Hurricane Lite" HP525 / 600 / 700 Swept Header with Hardin Marine Flange (Header Only, No Tailpipes)

Hardin Marine is proud to introduce our new Hurricane Lite Headers. Featuring the same quality design and sleek looks of their big tube counterparts, the Hurricane Lite Headers are designed to replace standard HP500, 600, and 700 Headers. The 100% 316L stainless steel headers are completely annealed and stress relieved prior to the show quality polishing to ensure maximum durability. The header and tailpipe share a double wall design and water transfer system that even allows the option of pre-heating the incoming sea water. The Hurricane Lite Headers are available with a standard Hardin Marine flange, or a CMI style flange, allowing the use of Hardin Marine or CMI style Tailpipes.

More original features are the V-Tex collector design and aerospace inspired multi-axis leak proof bolted tailpipe flange, no hose type clamps or rope seals are used here. Each header offers a welded water inlet tree as standard equipment, once again you won't find any failed rubber hoses here. These headers share the latest in exhaust technology to achieve maximum horsepower gains on even the highest horsepower engines. By incorporating long staggered length runners that also provide for generous tall valve cover clearance.


“Hurricane” Big Tube Swept Header Standard Collector

"Hurricane" Big Tube Swept Header Standard Collector

620-33000K
Your Price:
$6,399.99

Quantity:  

"Hurricane" Big Tube Swept Header Standard Collector (Header Only, No Tailpipes)

Thisstunning newly released header system is just one of the fabulous products to beunveiled during the 2005 boat show season.

This all-new swept style header offers a number of design advantages. The uniquefanned layout of the header tubes provide an incredibly narrow overall width of32-1/2 inches making these headers suitable for even the tightest twin-engineapplications. These headers have 2-1/4" diameter big tube inner runners toaccommodate the highest horsepower engine.

The 100% 316L stainless steel headers are completely annealed and stressrelieved prior to the show quality polishing to ensure maximum durability. Theheader and tailpipe share a double wall design and water transfer system thateven allows the option of pre-heating the incoming sea water. Even the tailpipesare exclusive to Hardin Marine, while other manufacturers continue to use alower grade 304 quality of stainless steel for their tailpipes Hardin Marinecontinues to use only the best quality 316L stainless steel.

More original features are the V-Tex collector design and aerospace inspiredmulti-axis leak proof bolted tailpipe flange, no hose type clamps or rope sealsare used here. Each header offers a welded water inlet tree as standardequipment, once again you won't find any failed rubber hoses here. These headers share the latest in exhaust technology to achievemaximum horsepower gains on even the highest horsepower engines. Byincorporating long staggered length runners that also provide for generous tallvalve cover clearance.


“Hurricane” Big Tube Swept Header Straight Horizontal Collector

"Hurricane" Big Tube Swept Header Straight Horizontal Collector

620-33050K
Your Price:
$6,399.99

Quantity:  

"Hurricane" Big Tube Swept Header Straight Horizontal Collector (Header Only, No Tailpipes)

This stunning newly released header system is just one of the fabulous products to be unveiled during the 2005 boat show season.

This all-new swept style header offers a number of design advantages. The unique fanned layout of the header tubes provide an incredibly narrow overall width of 32-1/2 inches making these headers suitable for even the tightest twin-engine applications. These headers have 2-1/4" diameter big tube inner runners to accommodate the highest horsepower engine.

The 100% 316L stainless steel headers are completely annealed and stress relieved prior to the show quality polishing to ensure maximum durability. The header and tailpipe share a double wall design and water transfer system that even allows the option of pre-heating the incoming sea water. Even the tailpipes are exclusive to Hardin Marine, while other manufacturers continue to use a lower grade 304 quality of stainless steel for their tailpipes Hardin Marine continues to use only the best quality 316L stainless steel.

More original features are the V-Tex collector design and aerospace inspired multi-axis leak proof bolted tailpipe flange, no hose type clamps or rope seals are used here. Each header offers a welded water inlet tree as standard equipment, once again you won't find any failed rubber hoses here. These headers share the latest in exhaust technology to achieve maximum horsepower gains on even the highest horsepower engines. By incorporating long staggered length runners that also provide for generous tall valve cover clearance.


“Hurricane” Big Tube Swept Header with Standard Bravo Tailpipes

"Hurricane" Big Tube Swept Header with Standard Bravo Tailpipes

620-33000
Your Price:
$6,999.99

Quantity:  

"Hurricane" Big Tube Swept Header with Standard Bravo Tailpipes

This stunning newly released header system is just one of the fabulous products to be unveiled during the 2005 boat show season.

This all-new swept style header offers a number of design advantages. The unique fanned layout of the header tubes provide an incredibly narrow overall width of 32-1/2 inches making these headers suitable for even the tightest twin-engine applications. These headers have 2-1/4" diameter big tube inner runners to accommodate the highest horsepower engine.

The 100% 316L stainless steel headers are completely annealed and stress relieved prior to the show quality polishing to ensure maximum durability. The header and tailpipe share a double wall design and water transfer system that even allows the option of pre-heating the incoming sea water. Even the tailpipes are exclusive to Hardin Marine, while other manufacturers continue to use a lower grade 304 quality of stainless steel for their tailpipes Hardin Marine continues to use only the best quality 316L stainless steel.

More original features are the V-Tex collector design and aerospace inspired multi-axis leak proof bolted tailpipe flange, no hose type clamps or rope seals are used here. Each header offers a welded water inlet tree as standard equipment, once again you won't find any failed rubber hoses here. These headers share the latest in exhaust technology to achieve maximum horsepower gains on even the highest horsepower engines. By incorporating long staggered length runners that also provide for generous tall valve cover clearance.

This system includes:

Custom tailpipes built to your dimensions are available at an additional charge.


0-10000 RPM Tachometer 3-3/8

0-10000 RPM Tachometer 3-3/8" Gauge

105-96 + Option
Starting From:
$99.99
This Part has options, please click the button below to order.

3-3/8" White, Black or Stainless 10000 RPM Hardin Tachometer

  • Non-corrosive hardware
  • Gasket sealed lens and bezel to prevent fogging
  • Each tachometer can be calibrated to work with 4, 6, and 8 cylinder engines as well as outboards.
  • Plastic body
  • Domelux Technology Lens
  • White back light
  • 3 7/8 Outer diameter 3 3/ 8 hole size
  • Can Not be used with Diesel Engines.


0-15 PSI White Boost Gauge 2-1/16

0-15 PSI Boost Gauge 2-1/16"

105-94 + Option
Starting From:
$59.99
This Part has options, please click the button below to order.
0-15 PSI  Boost Gauge 2-1/16" - White, Black or Stainless

Hardin Marine Boost gauges are built to last. All of these gauges areconstructed with smooth operating air core technology and the same greatfeatures that have made Hardin Marine a leading gauge manufacturer tothe marine industry. Hardin Marine gauges come with white lights. Includes hose and fitting kit.

0-15 PSI Boost Gauge 2-1/16

0-30 PSI Water Pressure Gauge 2-1/16"

105-94 + Option
Starting From:
$69.99
This Part has options, please click the button below to order.
0-30 PSI White, Black or Stainless Water Pressure Gauge 2-1/16" - Mechanical

Hardin Marine gauges are built to last. All of these gauges areconstructed in smooth operating air core technology and the same greatfeatures that have made Hardin Marine a leading gauge manufacturer tothe marine industry. Hardin Marine gauges come with white light. Includes hose and fittings kit.

Trim 2-1/16

0-6000 RPM Tachometer 3-3/8" Gauge

105-94 + Option
Starting From:
$88.99
This Part has options, please click the button below to order.

3-3/8" White, Black or Stainless 6000 RPM Hardin Tachometer

Hardin tachometers provide the ultimate in readability and accuracyThese tachometers feature non-corrosive hardware andgasket sealed lens and bezel to prevent fogging Each tachometerfeatures the "Domelux" Technology lens and is built to withstand theseverest of conditions Each tachometer can be calibrated to work with 4,6, and 8 cylinder engines as well as outboards.Hardin Marine gauges come with white light.

3-3/8

0-80 MPH Speedometer 3-3/8" Gauge

105-94 + Option
Starting From:
$77.99
This Part has options, please click the button below to order.

3-3/8" White, Black or Stainless 80 MPH Speedometer Head Only

 Whilesome gauge distributors claim to manufacture as many as 95% of theirgauges, we are proud to say that 100% of Hardin Marine speedometers arehandmade, hand calibrated, and even tested to assure you're getting everylast mile per hour out of your boat With bold, clear dials, incandescentflood lighting, and a red needle,these speedometers will be easy toread even at high speeds Speedometer pick-up tubes (pitot) soldseparately. Hardin Marine gauges come with white light.


2

0-80 PSI Oil Pressure 2-1/16" Gauge

105-94 + Option
Starting From:
$36.99
This Part has options, please click the button below to order.

2" Oil Pressure Gauge, 0-80 PSI - White, Black or Stainless

Hardin Marine oil pressure  gauges both feature a bold attractivestyling which makes these gauges very easy to read at speed. Many gauges featurecrowded dials but this is not the case with these. These gauges possess all ofthe Hardin Marine innovative features so that you may rest assured your gaugesare accurate. Senders sold separately. Hardin Marine gauges come with white light.



1 Stage Aluminum  Sea Pump

1 Stage Aluminum Sea Pump

625-4900
Your Price:
$599.99

Quantity:  

Sea Pump

1 Stage

Aluminum

1" NPT Inlet and Outlet Flanges

Optional 1-1/4” Custom Billet Hose Barbs

The Extreme single stage pump is the perfect choice for a stock or slightly modified engine. It is designed with large 1” NPT inlet and outlet flanges that deliver the flow of water more efficiently than a stock single impeller OEM pump. By allowing direct inlet water flow these pumps churn out up to 20% more water than a stock factory pump. These pumps are fully rebuildable and will be the last pump you ever buy! Available in aluminum for fresh water use or stainless steel for use in salt water with 1” NPT inlet/outlet and optional 1-1/4” custom billet hose barbs.


1 Stage Aluminum  Sea Pump with 1 Groove Pulley & Single 1” NPT  Inlet/Outlet

1 Stage Aluminum Sea Pump with 1 Groove Pulley & Single 1" NPT Inlet/Outlet

625-4901
Your Price:
$659.99

Quantity:  

Sea Pump

1 Stage

1 Groove Pulley

Aluminum

Single 1" NPT Inlet and Outlet Flange

Optional 1-1/4” Custom Billet Hose Barbs

The Extreme single stage pump is the perfect choice for a stock or slightly modified engine. It is designed with large 1” NPT inlet and outlet flanges that deliver the flow of water more efficiently than a stock single impeller OEM pump. By allowing direct inlet water flow these pumps churn out up to 20% more water than a stock factory pump. These pumps are fully rebuildable and will be the last pump you ever buy! Available in aluminum for fresh water use or stainless steel for use in salt water with 1” NPT inlet/outlet and optional 1-1/4” custom billet hose barbs.


1 Stage Aluminum  Sea Pump with 2 Groove Pulley & Single 1” NPT  Inlet/Outlet

1 Stage Aluminum Sea Pump with 2 Groove Pulley & Single 1" NPT Inlet/Outlet

625-4902
Your Price:
$732.99

Quantity:  

Sea Pump

1 Stage

2 Groove Pulley

Aluminum

Single 1" NPT Inlet and Outlet Flange

Optional 1-1/4” Custom Billet Hose Barbs

The Extreme single stage pump is the perfect choice for a stock or slightly modified engine. It is designed with large 1” NPT inlet and outlet flanges that deliver the flow of water more efficiently than a stock single impeller OEM pump. By allowing direct inlet water flow these pumps churn out up to 20% more water than a stock factory pump. These pumps are fully rebuildable and will be the last pump you ever buy! Available in aluminum for fresh water use or stainless steel for use in salt water with 1” NPT inlet/outlet and optional 1-1/4” custom billet hose barbs.


2 Stage Stainless Rear Cap / Bearing Upgrade

1 Stage Stainless Rear Cap / Bearing Upgrade

625-4162
Your Price:
$295.99

Quantity:  

Rear Cap / Bearing Upgrade

1 Stage

Stainless Steel

The latest in multi-stage pump design has again advanced. All current series Hardin multi stage sea pumps now feature this roller bearing tail shaft design. If you have an earlier bushing styled tail shaft pump it can now easily be upgrades to the later version with one of our kits. This kit includes a new pump shaft, bearing, seal, and new stainless steel rear cover plate.


1 Stage Stainless Steel Sea Pump

1 Stage Stainless Steel Sea Pump

625-4910
Your Price:
$599.99

Quantity:  

Sea Pump

1 Stage

Stainless Steel

1" NPT Inlet and Outlet Flange

Optional 1-1/4” Custom Billet Hose Barbs

The Extreme single stage pump is the perfect choice for a stock or slightly modified engine. It is designed with large 1” NPT inlet and outlet flanges that deliver the flow of water more efficiently than a stock single impeller OEM pump. By allowing direct inlet water flow these pumps churn out up to 20% more water than a stock factory pump. These pumps are fully rebuildable and will be the last pump you ever buy! Available in aluminum for fresh water use or stainless steel for use in salt water with 1” NPT inlet/outlet and optional 1-1/4” custom billet hose barbs.


1 Stage Stainless Steel Sea Pump with 1 Groove Pulley & Single 1” NPT Inlet/Outlet

1 Stage Stainless Steel Sea Pump with 1 Groove Pulley & Single 1" NPT Inlet/Outlet

625-4911
Your Price:
$649.99

Quantity:  

Sea Pump

1 Stage

1 Groove Pulley

Stainless Steel

Single 1" NPT Inlet and Outlet Flange

Optional 1-1/4” Custom Billet Hose Barbs


The Extreme single stage pump is the perfect choice for a stock or slightly modified engine. It is designed with large 1” NPT inlet and outlet flanges that deliver the flow of water more efficiently than a stock single impeller OEM pump. By allowing direct inlet water flow these pumps churn out up to 20% more water than a stock factory pump. These pumps are fully rebuildable and will be the last pump you ever buy! Available in aluminum for fresh water use or stainless steel for use in salt water with 1” NPT inlet/outlet and optional 1-1/4” custom billet hose barbs.


1 Stage Stainless Steel Sea Pump with 2 Groove Pulley & Single 1” NPT Inlet/Outlet

1 Stage Stainless Steel Sea Pump with 2 Groove Pulley & Single 1" NPT Inlet/Outlet

625-4912
Your Price:
$704.99

Quantity:  

Sea Pump

1 Stage

2 Groove Pulley

Stainless Steel

Single 1" NPT Inlet and Outlet Flange

Optional 1-1/4” Custom Billet Hose Barbs

The Extreme single stage pump is the perfect choice for a stock or slightly modified engine. It is designed with large 1” NPT inlet and outlet flanges that deliver the flow of water more efficiently than a stock single impeller OEM pump. By allowing direct inlet water flow these pumps churn out up to 20% more water than a stock factory pump. These pumps are fully rebuildable and will be the last pump you ever buy! Available in aluminum for fresh water use or stainless steel for use in salt water with 1” NPT inlet/outlet and optional 1-1/4” custom billet hose barbs.


1

1" Marine Hard Water Hose

100-100-1004
Your Price:
$7.99

Quantity:  
Marine Hard Wall Water Hose 1" I.D.

This hard wall water hose is used in many marine applications and is designed to last in harsh environments.

Water hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.


1

1" Marine Vent / Bilge Hose

100-150-1180
Your Price:
$1.99

Quantity:  
1" I.D Vent / Bilge Hose

This hose is commonly used for venting or bilge dump.

Vent / Bilge hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.


1

1" NPT Adjustable Thru-Hull Pick-up Kit

410-1082
Your Price:
$159.99

Quantity:  

1" NPT Adjustable Thru-Hull Pick-up Kit

This pick-up has become a favorite of boat builders world wide on step bottom and catamaran style boats Bottom style pick-up scoops water through a 1-1/4" O.D stainless tube which has an adjustable depth Pickup may be mounted wherever you want it - near the transom, close to the engine water pump or near the sea strainer Features AN o-ring seal.



1

1" NPT Dual-Screen Swirl-Away High Performance Sea Strainer

620-913216
Your Price:
$639.99

Quantity:  

1" NPT Dual-Screen Swirl-Away High Performance Sea Strainer Includes Polished Swirl Lid

Marine sea strainers have become an integral part on every performance boat today. After years of catastrophic engine failures due to inadequate cooling systems, it is now recognized that any boat not equipped with a sea strainer is gambling with its engine life expectancy and destined for loss to an unprotected cooling system.

Sea strainers all perform a similar function, which is to sift or strain foreign objects before they reach and damage engine components such as intercoolers, water pumps, cylinder heads, and oil coolers. Each sea strainer has unique features so choose the one best suited to your needs.

It seems as though we usually find that no matter how great some products are there always seems to be some sort of shortcoming - until now. We have taken a relatively simple product and refined it to perfection. Many sea strainers just simply strain seaweed or debris from the raw incoming water,unfortunately use of these units is usually cumbersome due to the need for wrenches, poor accessibility, or flat filter screens that drop most of the debris when removed.

These "NEW" sea strainers have solved it all. Starting with the very best in 100% 316L premium grade stainless steel. The heart of these units is in their unique cone shaped strainer basket. This allows a greater strainer basket surface area than other brands, while the design of the basket actually grinds up debris in the process, almost acting as a self-cleaning type of unit.

Monitoring the sea strainer is a snap with the 100% Lexan lid (not cheap polycarbonate) which allows a clear view to inspect the unit. The Lexan lid will withstand water pressure spikes in excess of 100 PSI without failure. The best part is still the ease of use, just one hand will remove the large easy to grip knob, no wrenches, wing nuts or bolts used here. As the lid is removed the sealing O-ring is captured in the lid so you won't be searching for it like other units. The cone shaped strainer basket then slides out trapping all of the strainers contents, most units have anon-removable screen that you have scoop out by hand.

Each assembly features dual 1" NPT inlet and outlets along with a 3/4" NPT pressure relief port. A 360degree swivel bracket allows maximum mounting flexibility in all applications.


1

1" NPT Dual-Screen Swirl-Away High Performance Sea Strainer with Pressure Relief Valve

620-913201
Your Price:
$699.99

Quantity:  

1" NPT Dual-Screen Swirl-Away High Performance Sea Strainer Includes Pressure Relief Valve and Polished Swirl Lid

Marine sea strainers have become an integral part on every performance boat today. After years of catastrophic engine failures due to inadequate cooling systems, it is now recognized that any boat not equipped with a sea strainer is gambling with its engine life expectancy and destined for loss to an unprotected cooling system.

Sea strainers all perform a similar function, which is to sift or strain foreign objects before they reach and damage engine components such as intercoolers, water pumps, cylinder heads, and oil coolers. Each sea strainer has unique features so choose the one best suited to your needs.

It seems as though we usually find that no matter how great some products are there always seems to be some sort of shortcoming - until now. We have taken a relatively simple product and refined it to perfection. Many sea strainers just simply strain seaweed or debris from the raw incoming water,unfortunately use of these units is usually cumbersome due to the need for wrenches, poor accessibility, or flat filter screens that drop most of the debris when removed.

These "NEW" sea strainers have solved it all. Starting with the very best in 100% 316L premium grade stainless steel. The heart of these units is in their unique cone shaped strainer basket. This allows a greater strainer basket surface area than other brands, while the design of the basket actually grinds up debris in the process, almost acting as a self-cleaning type of unit.

Monitoring the sea strainer is a snap with the 100% Lexan lid (not cheap polycarbonate) which allows a clear view to inspect the unit. The Lexan lid will withstand water pressure spikes in excess of 100 PSI without failure. The best part is still the ease of use, just one hand will remove the large easy to grip knob, no wrenches, wing nuts or bolts used here. As the lid is removed the sealing O-ring is captured in the lid so you won't be searching for it like other units. The cone shaped strainer basket then slides out trapping all of the strainers contents, most units have anon-removable screen that you have scoop out by hand.

Each assembly features dual 1" NPT inlet and outlets along with a 3/4" NPT pressure relief port. A 360degree swivel bracket allows maximum mounting flexibility in all applications.


1

1" NPT Inlet/Outlet Sea Pump Adapter

625-4150
Your Price:
$31.99

Quantity:  

Sea Pump Adapter

1" NPT Inlet / Outlet

These components are designed to assist in the plumbing of your engine when using the Hardin Marine Multi-Stage sea pumps. A wide range of configurations can be created by using different inlet and outlet adapters. All of these components are hard anodized to resist harsh corrosive environments.


1

1" NPT Stainless Steel Pipe Plug

540-223000
Your Price:
$17.99

Quantity:  
1" NPT Stainless Pipe Plug

1

1" NPT Stainless Steel Water Shut-Off Valve

620-913310
Your Price:
$59.95

Quantity:  

1" NPT Stainless Steel Water Shut-Off Valve
(Shown with Optional Stainless Handle)

Water Shut off valves are mandated by the U S Coast Guard on all water inlet line connection today. The high quality stainless steel ball valves are the perfect answer to that need.


1

1" NPT Standard Swirl-Away High Performance Sea Strainer

620-913202
Your Price:
$479.99

Quantity:  

1" NPT Standard Swirl-Away High Performance Sea Strainer

Marine sea strainers have become an integral part on every performance boat today. After years of catastrophic engine failures due to inadequate cooling systems, it is now recognized that any boat not equipped with a sea strainer is gambling with its engine life expectancy and destined for loss to an unprotected cooling system.

Sea strainers all perform a similar function, which is to sift or strain foreign objects before they reach and damage engine components such as intercoolers, water pumps, cylinder heads, and oil coolers. Each sea strainer has unique features so choose the one best suited to your needs.

It seems as though we usually find that no matter how great some products are there always seems to be some sort of shortcoming - until now. We have taken a relatively simple product and refined it to perfection. Many sea strainers just simply strain seaweed or debris from the raw incoming water,unfortunately use of these units is usually cumbersome due to the need for wrenches, poor accessibility, or flat filter screens that drop most of the debris when removed.

These "NEW" sea strainers have solved it all. Starting with the very best in 100% 316L premium grade stainless steel. The heart of these units is in their unique cone shaped strainer basket. This allows a greater strainer basket surface area than other brands, while the design of the basket actually grinds up debris in the process, almost acting as a self-cleaning type of unit.

Monitoring the sea strainer is a snap with the 100% Lexan lid (not cheap polycarbonate) which allows a clear view to inspect the unit. The Lexan lid will withstand water pressure spikes in excess of 100 PSI without failure. The best part is still the ease of use, just one hand will remove the large easy to grip knob, no wrenches, wing nuts or bolts used here. As the lid is removed the sealing O-ring is captured in the lid so you won't be searching for it like other units. The cone shaped strainer basket then slides out trapping all of the strainers contents, most units have anon-removable screen that you have scoop out by hand.

Each assembly features dual 1" NPT inlet and outlets along with a 3/4" NPT pressure relief port. A 360degree swivel bracket allows maximum mounting flexibility in all applications.


Page:1 2 3 4 … 57  Move Next